HS code of Bitumen Enamel
Section 1. Product and company identification
Product name: bitumen enamel
Section 2. Composition/information on ingredients
Chemical class: alkyd based paints
Ec classification: harmful, xn
R phrases: r10, 20/21, 65
S phrases: s2, 13, 43, 62
Hazardous and/or other relevant components % (w/w) cas no. E.c. No.
White spirits > 10 % 64742-88-7 649-405-00-x
Solvent naphta > 10 % 64742-94-5 649-424-00-3
Hydrocarbon blend (c9-c11 n-paraffins) > 10 % 64771-72-8
Section 3. Hazards identification
Sapma health rating: 2-moderate – temporary or minor injury possible even if treatment given.
Inhalation: harmful, avoid excessive exposure to this material.
Skin: irritating, risk of dermatitis
Eyes: highly irritating and risk of irreversible damage.
Ingestion: harmful. May cause lung damage if swallowed.
No carcinogenic, mutagenic or genetic effects established.
May have short-term environmental effects. Contain, monitor & remove.
Section 4. First aid measures
Inhalation: move to fresh air. In case of discomfort seek medical attention.
Skin: remove contaminated clothing. Use a skin cleaner/soap and water. If any discomfort get medical attention.
Eyes: rinse immediately with plenty of water. Refer immediately to doctor.
Ingestion: wash mouth with plenty of water. Do not induce vomiting. Seek medical attention.
Section 5. Fire fighting measures
Flammable with toxic fumes.
Containers can burst in a fire. Can form explosive vapour/air mixture. Static discharge hazard.
Use foam, co2, dry powder. Use fog to cool and control. Do not use water jets. Cool containers in case of fire.
Section 6. Accidental release measures – see also sections 5, 8, 13
Ensure sufficient ventilation.
Contain & collect spillage with inert material and dispose of according to local regulations.
Keep out of drains and sewers.
Section 7. Handling and storage
Keep away from ignition sources. No open flames. No smoking. Keep containers cool. Store away from direct sun.
Avoid free fall of liquid – use earthing.
Section 8. Exposure controls/personal protection
Name cas oel (mg/m3) oel (ppm) stoel (mg/m3) stoel (ppm)
Xylene 1330-20-7 435 100 650 150 rl+ s
White spirits 64742-88-7 350 200 720 125 rl
(cl/rl = controlled/recommended level ‘s’ = skin annotation)
Sapma rating: 2-h-e ppe – respirator and eye protection
Inhalation: in case of insufficient ventilation, use suitable respiratory protection.
Skin: avoid direct contact. Use barrier cream and impervious gloves.
Eyes: use goggles. Avoid direct contact.
Ingestion: observe the rules of hygiene. Wash before eating, drinking or smoking.
Section 9. Physical and chemical properties
Appearance: white to off white liquid
Flash point: > 23 °c
Density: 0.87 – 1.03 (typical)
Viscosity: 70 – 74 ku
Solubility: soluble in organic solvents, insoluble in water.
Section 10. Stability and reactivity
Stable under normal conditions. Could generate static – use earthing.
Inert – no reaction with fire-fighting water.
Section 11. Toxicological information
No carcinogenic, mutagenic or genetic effects established
Section 12. Ecological information
May have short-term environmental effects. Contain, monitor & remove.
Section 13. Disposal information
Use reputable waste disposal contractors – potential for spontaneous combustion. Care with used containers.
Section 14. Transport information
Sin/un number: 1263
Shipping name: bitumen enamel
Packaging group: iii
Class: 3
Section 15. Regulatory information
Classification: harmful, xn
R10 flammable
R20/21 harmful by inhalation and contact with skin
R65 harmful – may cause lung damage if swallowed
S2 keep out of reach of children. (retail sales only)
S13 keep away from food, drink and animal feeding stuffs
S43 in case of fire, use water fog, foam or powder – do not use water jets
S62 if swallowed, do not induce vomiting, seek medical advice immediately
Section 16. Other information
Take precautionary measures against static discharges. In case of any discomfort always seek medical advice.
All information is given in good faith but without guarantee in respect of accuracy. No responsibility is accepted for errors or omissions or the consequences thereof.
